MSI P55-GD61 Series Manual Download Page 138

Page: 138 / 142

C-14

JMcron RAID Introducton

▍

MS-7583

JMcron RAID Introducton

▍

MS-7583

Create RAID

JMRadTool supports the creaton of RAID 0, 1 and JBOD.

Left-clck the “Create Rad” button.
A CREATE RAID WIZARD dalogue wll dsplay on the screen, followng the de-

scrpton of every step to complete the creaton.

Create RAID from Exstng Dsk

You can combne the Exstng Dsk (Source dsk may content OS and Data) wth other

HD (must be larger than source Dsk) to be RAID. The data on Source Dsk wll be re-

served. After RAID s bult, system wll need to reboot.

Left-Clck the “Create RAID from Exstng Dsk” con on the toolbar.
A “CREATING RAID FROM EXISTING DISK” wzard dalogue wll dsplay on the

screen, followng the descrpton of every step to complete the creaton.

1.
2.

Summary of Contents for P55-GD61 Series















































































































































Search results

Summary of Contents for P55-GD61 Series

Reviews:

Related manuals for P55-GD61 Series

Brands by name

Popular brands

MSI P55-GD61 Series, Manual

Search results

Summary of Contents for P55-GD61 Series

Reviews:

Related manuals for P55-GD61 Series

Brands by name

Popular brands