BIOS Setup
▍
MS-S0101
3-19
BIOS Setup
▍
MS-S0101
Boot
Setup Prompt Timeout
This setting specifies the number of seconds to wait for setup activation key.
Bootup NumLock State
Ths settng s to set the Num Lock status when the system s powered on. Settng
to [On] wll turn on the Num Lock key when the system s powered on. Settng to
[Off] wll allow users to use the arrow keys on the numerc keypad.
Quiet Boot
Ths BIOS feature determnes f the BIOS should hde the normal POST mes-
sages wth the motherboard or system manufacturer’s full-screen logo.
When t s enabled, the BIOS wll dsplay the full-screen logo durng the boot-up
sequence, hdng normal POST messages.
When t s dsabled, the BIOS wll dsplay the normal POST messages, nstead
of the full-screen logo.
Please note that enablng ths BIOS feature often adds 2-3 seconds of delay to
the bootng sequence. Ths delay ensures that the logo s dsplayed for a suf-
ficient amount of time. Therefore, it is recommended that you disable this BIOS
feature for a faster boot-up tme.
Boot Option Priorities
The tems allow you to set the sequence of boot devces where BIOS attempts to
load the dsk operatng system. Frst press <Enter> to enter the sub-menu. Then
you may use the arrow keys ( ↑↓ ) to select the desired device, then press <+>,
<-> or <PageUp>, <PageDown> key to move t up/down n the prorty lst.
▶
▶
▶
▶
