2-4
Hardware Setup
▍
MS-S0101
Hardware Setup
▍
MS-S0101
CPU Installation
When you are nstallng the CPU, make sure the CPU has a cooler attached on
the top to prevent overheatng. Meanwhle, do not forget to apply some thermal
paste on CPU before nstallng the heat snk/cooler fan for better heat dsper-
son.
Open the load lever and remove the
plastic cap.
1.
Lift the load lever up to fully open
position.
2.
After confirming the CPU direction for
correct mating, put down the CPU in
the socket housing frame. Be sure to
grasp on the edge of the CPU base.
Note that the alignment keys are
matched.
3.
Engage the load lever while pressing
down lightly onto the load plate.
4.
Alignment Key
Important
Visually inspect if the CPU is seated well into the socket. If not, take out the CPU with
pure vertical motion and reinstall.
