BIOS Setup
▍
MS-96E3
3-15
BIOS Setup
▍
MS-96E3
PCIE Device Wake Up System
This setting specifies whether the system will be awakened by the PCI Ex
-
press PME (Power Management Event).
Resume On RTC Alarm
When [Enabled], your can set the date and tme at whch the RTC (real-tme
clock) alarm awakens the system from suspend mode.
Restore on AC Power Loss
This setting specifies whether your system will reboot after a power failure or
nterrupt occurs. Avalable settngs are:
[Power Off] Leaves the computer n the power off state.
[Power On] Leaves the computer n the power on state.
[Last State] Restores the system to the prevous status before power
falure or nterrupt occurred.
PWRON LAN1,2 / LAN3,4 Control, PWROFF LAN1,2 / LAN3,4 Control,
WatchDog LAN1,2 / LAN3,4 Control
LAN Bypass feature removes a sngle pont of falure so that essental bus-
ness communcaton can contnue whle a network falure s dagnosed and
resolved. In the event of a power, hardware or software falure, Hardware
Bypass will automatically activate, allowing network traffic to continue. Traffic
between the LAN and WAN s allowed wthout nterrupton.
▶
▶
▶
▶
Summary of Contents for MS-96E3
Page 1: ... MS 96E3 v1 X Server Board ...
Page 12: ...1 4 Overview Overview Mainboard Layout ...
Page 16: ......
