MSI MS-7758 (v3.x) Manual Download Page 71

Page: 71 / 92

B-3

MS-7758

Append

x B

Usng Intel Rapd Storage Technology Opton ROM

The Intel Rapd Storage Technology Opton ROM should be ntegrated wth the sys-

tem BIOS on all manboards wth a supported Intel chpset. The Intel Rapd Storage

Technology Opton ROM s the Intel RAID mplementaton and provdes BIOS and DOS

dsk servces. Please use <Ctrl> + <I> keys to enter the “Intel

RAID for Seral ATA”

status screen, whch should appear early n system boot-up, durng the POST (Power-

On Self Test). Also, you need to enable the RAID functon n BIOS to create, delete and

reset RAID volumes.

Creatng, Deletng and Resettng RAID Volumes:

The Seral ATA RAID volume may be configured usng the RAID Configuraton utlty

stored wthn the Intel RAID Opton ROM. Durng the Power-On Self Test (POST), the

followng message wll appear for a few seconds.

Important

The “Devce Model”, “Seral #” and “Sze” n the followng example mght be dfferent

from your system.

RAID Volumes
None defined.

Physcal Dsks:
Port Devce Model

Seral #

Sze

Type/Status(Vol ID)

1 XXXXXXXXXXXXX XXXXXXXXXXXXX

XXX.XGB

Non-RAID Dsk

2 XXXXXXXXXXXXX XXXXXXXXXXXXX

XXX.XGB

Non-RAID Dsk

Press <CTRL-I> to enter Configuraton Utlty..

After the above message shows, press <Ctrl> and <I> keys smultaneously to enter the

Intel Rapd Storage Technology Opton ROM.

Important

The followng procedure s only avalable wth a newly-bult system or f you are renstall-

ng your OS. It should not be used to mgrate an exstng system to RAID.

Summary of Contents for MS-7758 (v3.x)





























































































Search results

Summary of Contents for MS-7758 (v3.x)

Reviews:

Related manuals for MS-7758 (v3.x)

Brands by name

Popular brands

MSI MS-7758 (v3.x), Manual

Search results

Summary of Contents for MS-7758 (v3.x)

Reviews:

Related manuals for MS-7758 (v3.x)

Brands by name

Popular brands