MSI MS-7758 (v3.x) Manual Download Page 60

Page: 60 / 92

2-20

BIOS Setup

M-Flash

BIOS Boot Functon

Ths allows you to enable/ dsable the system to boot from the BIOS file nsde USB

drve (FAT/ 32 format only).

Select one file to Boot

When the BIOS Boot functon as sets to [Enabled], ths tem s selectable. Ths tem

allows to select partcular BIOS file from the USB/ Storage (FAT/ 32 format only)

drve. And the system wll boot from selected BIOS file.

Save BIOS to storage

Please setup a specfic folder n specfic USB/ Storage drve to save BIOS file from

BIOS ROM chp data. Note: t only supports FAT/ 32 file system drve.

Select one file to update BIOS

Ths tem allows you to select a partcular BIOS file from the USB/ Storage (FAT/ 32

format only) drve for updatng BIOS.

▶

Summary of Contents for MS-7758 (v3.x)





























































































Search results

Summary of Contents for MS-7758 (v3.x)

Reviews:

Related manuals for MS-7758 (v3.x)

Brands by name

Popular brands

MSI MS-7758 (v3.x), Manual

Search results

Summary of Contents for MS-7758 (v3.x)

Reviews:

Related manuals for MS-7758 (v3.x)

Brands by name

Popular brands