MSI MS-7602 Manual Download Page 2

Page: 2 / 92

Preface

▍

Copyrght Notce

The materal n ths document s the ntellectual property of MICRO-STAR INTERNA-

TIONAL. We take every care n the preparaton of ths document, but no guarantee s

gven as to the correctness of ts contents. Our products are under contnual mprove-

ment and we reserve the rght to make changes wthout notce.

Trademarks

All trademarks are the propertes of ther respectve owners.

MSI

s regstered trademark of Mcro-Star Int’l Co.,Ltd.

NVIDIA

s regstered trademark of NVIDIA Corporaton.

ATI

s regstered trademark of ATI Technologes, Inc.

AMD

s regstered trademarks of AMD Corporaton.

Intel

s regstered trademarks of Intel Corporaton.

Wndows

s regstered trademarks of Mcrosoft Corporaton.

AMI

s regstered trademark of Advanced Mcro Devces, Inc.

Award

s a regstered trademark of Phoenx Technologes Ltd.

Sound Blaster

s regstered trademark of Creatve Technology Ltd.

Realtek

s regstered trademark of Realtek Semconductor Corporaton.

JMcron

s regstered trademark of JMcron Technology Corporaton.

Netware

s a regstered trademark of Novell, Inc.

Revson Hstory

Revson

Revson Hstory

Date

V1.0

For G41TM-E65/G41TM-E63/G41TM-E55

May 2009

V1.1

For G41TM-S01

January 2010

Techncal Support

If a problem arses wth your system and no soluton can be obtaned from the user’s

manual, please contact your place of purchase or local dstrbutor. Alternatvely, please

try the followng help resources for further gudance.

Vst the MSI webste for FAQ, techncal gude, BIOS updates, drver updates,

and other nformaton:

http://www.ms.com/ndex.php?func=servce

Contact our techncal staff at:

http://ocss.ms.com

￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭

◙

Summary of Contents for MS-7602





























































































Search results

Summary of Contents for MS-7602

Reviews:

Related manuals for MS-7602

Brands by name

Popular brands

MSI MS-7602, Manual

Search results

Summary of Contents for MS-7602

Reviews:

Related manuals for MS-7602

Brands by name

Popular brands