MSI MS-7602 Manual Download Page 42

Page: 42 / 92

3-8

BIOS Setup

▍

MS-7602

BIOS Setup

▍

MS-7602

dvanced

bioS f

eatureS

BIOS Flash Protecton

Ths functon protects the BIOS from accdental corrupton by unauthorzed users or

computer vruses. When enabled, the BIOS data cannot be changed when attempt-

ng to update the BIOS wth a Flash utlty. To successfully update the BIOS, you wll

need to dsable ths Flash BIOS Protecton functon. You should enable ths functon

at all tmes. The only tme when you need to dsable t s when you want to update the

BIOS. After updatng the BIOS, you should mmedately re-enable t to protect t aganst

vruses.

Full Screen Logo Dsplay

Ths tem enables ths system to show the company logo on the boot-up screen. Set-

tngs are:

[Enabled]

Shows a stll mage (logo) on the full screen at boot.

[Dsabled]

Shows the POST messages at boot.

Quck Bootng

Settng the tem to [Enabled] allows the system to boot wthn 10 seconds snce t wll

skp some check tems.

Boot Up Num-Lock LED

Ths settng s to set the Num Lock status when the system s powered on. Settng to

[On] wll turn on the Num Lock key when the system s powered on. Settng to [Off] wll

allow users to use the arrow keys on the numerc keypad.

IOAPIC Functon

Ths field s used to enable or dsable the APIC (Advanced Programmable Interrupt

▶

Summary of Contents for MS-7602





























































































Search results

Summary of Contents for MS-7602

Reviews:

Brands by name

Popular brands

MSI MS-7602, Manual

Search results

Summary of Contents for MS-7602

Reviews:

Brands by name

Popular brands