11
Serial Port Connector: JCOM2
The mainboard offers one optional serial port JCOM2. It is a 16550A high speed communication port
that sends/receives 16 bytes FIFOs. You can attach a serial device directly to it.
2
10
1
9
SO UT
D CD
SIN
DT R
RI
CT S
RT S
DSR
G ND
Clear CMOS Jumper: JBAT1
There is a CMOS RAM on board that has a power supply from external battery to keep the data of
system configuration. With the CMOS RAM, the system can automatically boot OS every time it is
turned on. If you want to clear the system configuration, use the JBAT1 (Clear CMOS Jumper) to clear
data. Follow the instructions below to clear the data:
1
1
3
K ee p Da t a
Cle a r Da ta
1
3
MSI Reminds You...
You can clear CMOS by shorting 2-3 pin while the system is off. Then return to 1-2 pin position. Avoid
clearing the CMOS while the system is on; it will damage the mainboard.
AGP (Accelerated Graphics Port) Slot (for 845GEM-V only)
The AGP slot allows you to insert the AGP graphics card. AGP is an interface specification designed for
the throughput demands of 3D graphics. It introduces a 66MHz, 32-bit channel for the graphics
controller to directly access main memory. The mainboard supports 4x/8x 1.5V AGP card.
Summary of Contents for MS-7057
