A-19
nVIDIA SATA RAID
3
Connect the RAID disk that you want to use with any given RAID array.
4
Click
Next
and the following screen shot will appear:
5
Click
Finish
.
Initializing a RAID Array
Initializing a RAID array erases all the data that is stored on that array, and writes all
zeros to the disks. Initialization of newly configured RAID arrays is recommended to
ensure consistency and reliable performance on any supported fault tolerant array
such as RAID 0. Use this feature only if you are absolutely sure that you want to wipe
out all the data on
that array
.
Initialization of a fault tolerant array can only be done when the array is being
created. To initialize an array, perform the following steps:
Note:
In this example, a mirror array is initialized.
1
From the NVRAIDMAN window, right click on any available free disk and select
Create Array
as show in Figure below.
9182v1.0-Appendix A(nVIDIA SATA RAID).p65
2006/11/8,
上午
11:52
19
Summary of Contents for K9ND Master-A4R
