MSI K9ND Master-A4R User Manual Download Page 78

Page: 78 / 113

A-14

MS-9182 Server Board

Assigning a Dedicated Disk

To mark a disk as dedicated, or reserve it for use by a specific array,

Step 1: Mark the Disk as a Free Disk

Enter the system BIOS setup and make sure that the drive that you want to mark as

free is RAID enabled.

Boot into W indows and run the NVRAIDMAN program.

If the disk is not part of any RAID array, then it will appear under the Free Disk
section of the RAID GUI.

Step 2: Dedicate the Free Disk to an Array

W hile running NVRAIDMAN, dedicate the free disk to an array by doing the following:

1. Right click one of the two Mirrored arrays as shown below.

2. Select

Designate Spare

from the menu to launch the Spare Disk Allocation Wizard.

9182v1.0-Appendix A(nVIDIA SATA RAID).p65

2006/11/8,

上午

11:52

Summary of Contents for K9ND Master-A4R


















































































































Search results

Summary of Contents for K9ND Master-A4R

Reviews:

Related manuals for K9ND Master-A4R

Brands by name

Popular brands

MSI K9ND Master-A4R, User Manual

Search results

Summary of Contents for K9ND Master-A4R

Reviews:

Related manuals for K9ND Master-A4R

Brands by name

Popular brands