MSI K8N Neo3 MS-7135 User Manual Download Page 14

Page: 14 / 124

1-7

Getting Started

Live BIOS

™

/Live Driver

™

The Live BIOS

™

/Live Driver

™

is a tool used to detect

and update your BIOS/drivers online so that you don

’

t need to

search for the correct BIOS/driver version throughout the
whole Web site. To use the function, you need to install the

“

MSI Live Update 3

”

application. After the installation, the

“

MSI

Live Update 3

”

icon (as shown on the right) will appear on the

screen.

Double click the

“

MSI Live Update 3

”

icon, and the fol-

lowing screen will appear:

Several buttons are placed on the left column of the screen. Click the desired button
to start the update process.

Live BIOS

–

Updates the BIOS online.

Live Driver

–

Updates the drivers online.

Live VGA BIOS

–

Updates the VGA BIOS online.

Live VGA Driver

–

Updates the VGA driver online.

Live Utility

–

Updates the utilities online.

If the product you purchased does not support any of the functions listed above, a

“

sorry

”

message is displayed. For more information on the update instructions, insert

the companion CD and refer to the

“

Live Update Guide

”

under the

“

Manual

”

Tab.

Summary of Contents for K8N Neo3 MS-7135





























































































































Search results

Summary of Contents for K8N Neo3 MS-7135

Reviews:

Brands by name

Popular brands

MSI K8N Neo3 MS-7135, User Manual

Search results

Summary of Contents for K8N Neo3 MS-7135

Reviews:

Brands by name

Popular brands