AWARD
®
BIOS Setup
3-21
HDD Power Down
When enabled and after the set time of system inactivity, the hard disk drive
will be powered down while all other devices remain active. Settings are:
1, 2,
3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 Min
and
Disabled
.
HDD Down In Suspend
When enabled, the hard disk drive will be powered down while other devices
are in suspend mode. Settings are:
Disabled
,
Enabled
.
Soft-Off by PBTN
This allows you to set the time period for pressing the power button to force
the system to enter the Soft-Off mode. Settings are:
Delay 4 Sec
and
Instant-
Off
.
PWRON After PWR-Fail
This allows you to set whether you want your system to reboot after the power
has been interrupted.
Off
leaves your system off and
On
reboots the system.
Former-Sts
leaves the system in the former status. Setting options:
Off, On
and
Former-Sts
.
Wake-Up by PCI Card
This will enable the system to wake up through PCI card peripheral. The set-
tings are:
Enabled
or
Disabled
.
RI Resume/WOL
RI refers to Ring In. When set to
Enabled
, the system will resume from the
standby or suspend power saving mode whenever Modem Ring In event occurs.
To use the WOL function, you need a LAN add-on card which support power
on functions. Settings are:
Enabled
or
Disabled
.
Modem Use IRQ
This determines the IRQ in which the MODEM can use. The settings are:
3, 4,
5, 7, 9, 10, 11
and
NA
.
RTC Resume
This allows you to set the date and time alarm for your computer to boot up.
During
Disabled
, you cannot use this function. During
Enabled
, you can set
the date and time alarm.
Summary of Contents for K7D Master-L
Page 96: ...Appendix B B 8 3 Click Next 4 Click Next 6 Click Finish 5 Click Next ...
Page 98: ...Appendix B B 10 10 Click Next 12 Click Finish 11 Click Next ...
Page 100: ...Appendix B B 12 18 Click Finish 16 Click Next to continue 17 Click Next to continue ...
Page 105: ...USB 2 0 Controller Card B 17 5 Click Finish 4 Click Next ...