manualshive.com logo in svg

MSI K7D Master-L, User Manual

Share
Download
MSI K7D Master-L User Manual Download Page 45

2-28

Chapter 2

AGP (Accelerated Graphics Port) Pro Slot

The AGP Pro slot allows you to insert the AGP or AGP Pro graphics cards. The
universal AGP Pro slot is an extension of the existing AGP slot (with two
extended sections on both ends of the original AGP slot) and is backward
compatible with existing AGP cards.

PCI Slots

This mainboard offers two types of PCI slots for you to insert the desired
expansion cards:

1. 

PCI 64bit/66MHz

---supports 3V or universal cards (can be downgraded to

PCI 32bit/33MHz  or PCI 64bit/33MHz)

2. 

PCI 32bit/33MHz

---supports 5V or universal cards

When adding or removing expansion cards, make sure that you unplug the
power supply first. Meanwhile, read the documentation for the expansion card
to make any necessary hardware or software settings for the expansion card,
such as jumpers, switches or BIOS configuration.

Slots

The motherboard provides one AGP Pro slot, three 32-bit master PCI bus

slots, and two 64-bit master PCI bus slots.

64-Bit PCI Slots

AGP Pro Slot

32-Bit PCI Slots

Summary of Contents for K7D Master-L

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands