Chapter 3
3-20
tains all system context.
S3 (STR)
The S3 state is a low wake-up latency sleeping sate where all system
context is lost expect system memory. CPU, cache, and chipset context
are lost in this state. Hardware maintains memory context and restores
some CPU and L2 configuration context.
Run VGABIOS if S3 Resume
This item allows the system to initialize the VGA BIOS from S3 (Suspend to
RAM) sleep state. Settings are:
Auto
,
Yes
and
No
.
Power Management
This item is used to select the degree (or type) of power saving. There are three
options for power management:
User Define
Allows end users to configure the suspend mode manually
Min Saving
Suspend Mode=1 min
Max Saving
Suspend Mode=1 hour
Video Off Method
This determines the manner in which the monitor is blanked. Settings are:
Blank Screen
,
V/H SYNC+Blank
and
DPMS Support
.
Blank Screen
This option only writes blanks to the video buffer.
V/H SYNC +Blank
This selection will cause the system to turn off
the vertical and horizontal synchronization ports
and write blanks to the video buffer.
DPMS Support
Initial display power management signaling.
Suspend Type
This setting allows you to select the type of Suspend mode. Settings are:
Stop
Grant
(saves the state of the entire system to disk and then powers off the
system) and
PwrOn Suspend
(the CPU and core system remain powered on in
a very low-power mode).
Standby Mode
When enabled and after the set time of system inactivity, all devices except the
CPU will be shut off. The settings are:
30 Sec, 1/4/10/20/30 Min, 1 Hour
and
Disabled
.
Summary of Contents for K7D Master-L
Page 96: ...Appendix B B 8 3 Click Next 4 Click Next 6 Click Finish 5 Click Next ...
Page 98: ...Appendix B B 10 10 Click Next 12 Click Finish 11 Click Next ...
Page 100: ...Appendix B B 12 18 Click Finish 16 Click Next to continue 17 Click Next to continue ...
Page 105: ...USB 2 0 Controller Card B 17 5 Click Finish 4 Click Next ...
