A-14
MS-9618 ATX Server Board
RAID Migration Instructions
The Intel Matrix Storage Console offers the flexibility to upgrade from a single Serial
ATA (SATA) hard drive to RAID configuration when an additional SATA hard drive is
added to the system. This process will create a new RAID volume from an existing
disk. However, several important steps must be followed at the time the system is
first configured in order to take advantage of RAID when upgrading to a second
SATA hard drive:
1. BIOS must be configured for RAID before installing W indows 2000/2003
on the single SATA hard drive. Refer to
On-Chip Serial ATA
for properly
setting of the BIOS.
2. Install the Intel IAA RAID Driver during W indows Setup. Refer to
Install-
ing Software
for instructions on installing the driver during W indows
Setup.
3. Install the Intel Matrix Storage Console after the operating system is installed.
To create a volume from an existing disk, complete the following steps:
After the Intel Matrix Storage Console has been successfully installed and the sys-
tem has rebooted, click on the Intel Application Accelerator shortcut link (
Start --> All
Programs --> Intel M atrix Storage Manager --> Intel Matrix Storage Console
)
and the following window will appear:
MSI Reminds You...
A
Create from Existing Disk
operation will delete all existing data
from the added disk and the data cannot be recovered. It is critical to
backup all important data on the added disk before proceeding. However,
during the migration process, the data on the source disk is preserved.
9618v1.0-Appendix A(ICH7R SATA RAID).p65
2005/9/16,
下午
05:22
14
