2-6
MS-9618 ATX Server Board
10. Align the holes on the mainboard
with the heatsink. Push down the
cooler until its four clips get
wedged into the holes of the
mainboard.
12. Turn over the mainboard to
confirm that the clip-ends are
correctly inserted.
11. Press the four hooks down to
fasten the cooler. Then rotate the
locking switch (refer to the
correct direction marked on it) to
lock the hooks.
9. Press down the load lever lightly
onto the load plate, and then
secure the lever with the hook
under retention tab.
locking
switch
MSI Reminds You...
1. Confirm if your CPU cooler is firmly installed before turning on your
system.
2. Check the information in
PC Health Status
of
H/W Monitor
in BIOS
(refer to p.3-21 for details) for the CPU temperature.
3. Do not touch the CPU socket pins to avoid damage.
4. Whenever CPU is not installed, always protect your CPU socket pin
with the plastic cap covered (shown in Figure 1) to avoid damage.
5. Please note that the mating/unmating durability of the CPU is 20 cycles.
Therefore we suggest you do not plug/unplug the CPU too often.
