MSI E7210 MasterX-F, User Manual

Page: 30 / 117

2-13
Hardware Setup
Installing DDR Modules
1. The DDR DIMM has only one notch on the center of module. The mod-
ule will only fit in the right orientation.
2. Insert the DIMM memory module vertically into the DIMM slot. Then
push it in until the golden finger on the memory module is deeply in-
serted in the socket.
3. The plastic clip at each side of the DIMM slot will automatically close.
Volt
Notch
MSI Reminds You...
You can barely see the golden finger if the module is properly
inserted in the socket.
DIMM1 DIMM2 DIMM3 DIMM4 System Density Mode
128MB~1GB 128MB~1GB S
128MB~1GB 128MB~1GB S
128MB~1GB 128MB~1GB S
128MB~1GB 128MB~1GB S
128MB~1GB 128MB~1GB 256MB~2GB S
128MB~1GB 128MB~1GB 256MB~2GB S
128MB~1GB 128MB~1GB 256MB~2GB D
128MB~1GB 128MB~1GB 256MB~2GB D
128MB~1GB 128MB~1GB 128MB~1GB 128MB~1GB 512MB~4GB D
S: Single-Channel Mode D: Dual-Channel Mode