28
BIOS Setup
f
DigitALL Power
Press
Enter
to enter the sub-menu. Controls the digital powers related to CPU PWM.
f
CPU Loadline Calibration Control [Auto]
The CPU voltage will decrease proportionally according to CPU loading. Higher
load-line calibration could get higher voltage and good overclocking performance,
but increase the temperature of the CPU and VRM. If set to
Auto
, BIOS will
configure this setting automatically.
f
CPU NB Loadline Calibration Control [Auto]
The CPU-NB voltage will decrease proportionally according to CPU-NB loading.
Higher load-line calibration could get higher voltage and good overclocking
performance, but increase the temperature. If set to
Auto
, BIOS will configure this
setting automatically.
f
CPU Over Voltage Protection [Auto]
Sets the voltage limit for CPU over-voltage protection. If set to
Auto
, BIOS will
configure this setting automatically. Higher voltage provides less protection and
may damage the system.
f
CPU Under Voltage Protection [Auto]
Sets the voltage limit for CPU under-voltage protection. If set to
Auto
, BIOS will
configure this setting automatically. Higher voltage provides less protection and
may damage the system.
f
CPU Over Current Protection [Auto]
Sets the current limit for CPU over-current protection. If set to
Auto
, BIOS will
configure this setting 0utomatically.
[Auto]
This setting will be configured automatically by BIOS.
[Enhanced] Extends the current range for over-current protection.
f
VR 12VIN OCP Expander [Auto]
Expands the limitation of VR Over Current Protection with 12V input voltage. The
higher expanding value indicates less protection. Therefore, please adjust the
current carefully if needed, or it may damage the CPU/ VR MOS. If set to "Auto",
BIOS will configure this setting automatically.
f
CPU Voltages control [Auto]
These options allows you to set the voltages related to CPU. If set to
Auto
, BIOS will
set these voltages automatically or you can set it manually.
f
DRAM Voltages control [Auto]
These options allows you to set the voltages related to memory. If set to
Auto
, BIOS
will set these voltages automatically or you can set it manually.
f
CPU Memory Changed Detect [Enabled]*
Enables or disables the system to issue a warning message during boot when the CPU
or memory has been replaced.
[Enabled]
The system will issue a warning message during boot and then you have
to load the default settings for new devices.
[Disabled]
Disables this function and keeps the current BIOS settings.