MSI AE2220, Software Manual

Page: 7 / 63

MS-6657
vii
caUtIon:
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer.
Safety Instructions
Read the safety instructions carefully and thoroughly.
all cautions and warnings on the equipment or user’s manual should be
noted.
Keep the User’s Guide that comes with the package for future reference.
Keep this equipment away from humidity and high temperature.
lay this equipment on a reliable flat surface before setting it up.
Make sure that the power voltage is within its safety range and has
been adjusted properly to the value of 100~240V before connecting the
equipment to the power outlet. Do not disable the protective earth pin
from the plug. the equipment must be connected to an earthed mains
socket-outlet.
always unplug the ac power cord before installing any add-on card or
module to the equipment.
always disconnect the ac power cord or switch the wall socket off if
the equipment would be left unused for a certain time to achieve zero
energy consumption.
◙
◙
◙
the ventilator on the enclosure is used for air convection and to prevent the
equipment from overheating. Do not cover the ventilator.
Do not leave the equipment in an unconditioned environment with a storage
temperature above 60
o
c (140
o
f) or below 0
o
c (32
o
f), which may damage
the equipment.
the optical storage devices are classified as claSS 1 laSeR PRoDUct. Use of
controls or adjustments or performance of procedures other than those specified
is prohibited.
Do not touch the lens inside the drive.
1.
2.
never pour any liquid into the opening that could damage or cause electri-
cal shock.
Place the power cord in a way that people are unlikely to step on it. Do not
place anything on the power cord.
When installing the coaxial cable to the tV tuner, it is necessary to ensure
that the metal shield is reliable connected to protective earthing system of
the building.
always keep the strong magnetic or electrical objects away from the equip-
ment.
If any of the following situations arises, get the equipment checked by ser-
vice personnel:
the power cord or plug is damaged.
liquid has penetrated into the equipment.
the equipment has been exposed to moisture.
the equipment does not work well or you can not get it work according
to user’s manual.
the equipment has dropped and damaged.
the equipment has obvious sign of breakage.
◙
◙
◙
◙
◙
◙
Green Design and Recycling
this equipment and the components are designed recyclable while it
is no longer used.
Disposing and recycling services are offered for this equipment in cer-
tain countries.
concerning recycling and disposing information, please contact the lo-
cal distributor for further information.
Visit the MSI website for further information via
http://www.msi.com/index.php?func=html&name=service_worldwide.
◙
◙
◙
◙
廢電池請回收
for better environmental protection, waste batteries should be collected
separately for recycling or special disposal.