5-6
Chapter 5
Connecting the Speakers
When you have set the Multi-Channel Audio Function mode properly in
the software utility, connect your speakers to the correct phone jacks in
accordance with the setting in software utility.
n
2-Channel Mode for Stereo-Speaker Output
Refer to the following diagram and caption for the function of each
phone jack on the back panel when 2-Channel Mode is selected.
1
MIC
2
Line In
3
Line Out
(Front channels)
Back Panel
3
1
2
1
MIC
2 * Line Out
(Rear channels)
3
Line Out
(Front channels)
* Line In function is converted to
Line Out function when 4-Channel
Mode for 4-Speaker Output is
selected.
n
4-Channel Mode for 4-Speaker Output
The audio jacks on the back panel always provide 2-channel analog
audio output function, however these audio jacks can be transformed
to 4- or 6- channel analog audio jacks by selecting the corresponding
multi-channel operation from
No. of Speakers
.
Refer to the following diagram and caption for the function of each
jack on the back panel when 4-Channel Mode is selected.
3
1
2
Back Panel
