MZ62
-stereomicroscope user manual
www.m-shot.com
IV.
Use of the base
★
Make sure that the power is turned off when replacing the fuse.
★
Make sure that the ground wire of the instrument properly grounds the instrument.
★
Black and white working board and frosted glass board each, diameterφ95m m
。
1.
Each part name
2.
Operating
1. Adjust the brightness of the transmitted illumination
of the base or the upper light source
As shown by the icons
① ②
on the base, the knob
①
controls the upper light source, and the knob
②
controls
the lower light source.Turn the brightness adjustment knob,
turn it clockwise to increase the brightness, and vice versa
to decrease the brightness.
2. Replace the fuse
（
1
）
Unscrew the fuse set
①
from the back of the base
with a flat-blade screwdriver.
（
2
）
Pull out the fuse from the fuse holder
（
3
）
To replace the fuse with a new one, proceed in the
reverse order of the above.
