MshOt MF43-N, User Manual

Page: 17 / 32

11
①
②
3-4 Install the condenser
1
、
Turn the coarse focusing knob
①
to raise the
stage to the highest position.
2
、
Turn the condenser height adjusting knob
②
to minimize the condenser frame.
3
、
Completely loosen the fixing screw
③
of the condenser.
4
、
Hold the condenser with the numerical aperture number facing forward. Carefully push
the condenser into the innermost part along the dovetail slot.
5
、
Tighten the fixing screw
③
of the condenser, and then raise the condenser to the
highest position.
3-5 Install the stage
1
、
Place the stage gently on the stage bracket of
the microscope body and clip it into the fixed
position of the bracket to prevent the stage from
shaking up and down.
2
、
Tighten the fixing screw
①
of the stage.
3-6 Install the gripper
1
、
Gently clip the two bayonets
①
of the gripper
into the fixing screw
②
of the gripper along the
stage.
2
、
Tighten the clip holder fixing screw
②
.
②
①
①