Projectile hazards:
•
Even small projectiles, for example swirled by the outlet air of your tool, can
injure eyes and lead to blindness.
•
Always wear impact-resistant eye and face protection when involved with or near
the operation, repair or maintenance of the tool or changing accessories on the
tool.
•
Also take care that people surrounding you will follow the instruction to wear
impact-resistant eye goggles and face masks.
•
In case of a male function switch off the device immediately and provide the tool
to a authorized service station to check.
•
If you recognize high unusual vibration switch of the unit and look for the
reasons. Do not switch on again until before the problem is solved.
Individual safeness
•
Only use the tool in well-rested conditions.
•
Always take care what you are doing and use your commonsense.
•
Do not use the tool when you are tired or under the influence of medicine, alcohol
or drugs. Any carelessness will cause serious hurts.
•
Always wear adequate protective clothing and eye protection. Further protection
like dust masks, helmets, ear protection, work gloves or nonskid safety shoes
may be required. Pls. refer to the pictograms in this manual. Even if these
clothing’s are not especially required we highly recommend to use them as the
risk of injury will decrease formidable.
•
Always disconnect the device from air supply when not in use, before changing
accessories or maintenance to avoid starting the tool by mistake.
•
Always check the unit, hoses and fittings for damages or loose before use.
•
Make sure that any spanners or other parts you have used with the tool will be
removed before operating.
•
Do not super extend and take care on a balanced position and secure footing to
control the tool also in unexpected situations.
•
Long hairs and loose clothing could tangled up in rotating parts of the device and
cause serious hurts.
