MSH equipment EASY LIFT 3000, Manual

Page: 6 / 13

10.
WARNING – PRECAUTIONS WHEN IN USE
• EASY LIFT 3000 must be used only by personnel of full age, duly trained and authorised,
been provided with this instruction manual.
•
The instruction manual must be read carefully and duly applied in any part.
•
It is forbidden to use the machine to lift people.
•
Before starting the lifting/lowering operations, make sure that the structure is clear of tools,
rags and objects of any kind.
•
If there are electric cables in the operating area (because of working lights, portable tools,
etc.), be sure that they do not pass over the structure or rest on it, in order to avoid the risk of cutting
them and thus rendering the metal structure of the lift alive. This operation is compulsory before using
EASY LIFT 3000.
•
When positioning EASY LIFT 3000 under the vehicle wheels, or under the vehicle underbody
(using the supplied supports), make sure of the correct position of the lifting fork/support.
•
Do not lift the load without being sure of the stability of the fork or the support..
• Keep the load under observation, especially during the raise, to avoid incorrect inclinations or
troubles. If so, bring the load down and place the lift in such a way to have a balanced distribution of
the load.
•
Comply with EASY LIFT 3000 operating area established by the manufacturer.
•
Clean the fork/support whenever it is dirtied to avoid the risk of load sliding.
• Never manipulate or unscrew any part of the lift, to avoid dangerous separations of the parts.
• Always bring the load down to the round at the end of working hours, and avoid leaving the lift
loaded in standing position for a long period.
•
Never exceed the maximum capacity of the lift Kg 1500.
• Once positioned the vehicle, always insert the safety pin in the column to hold the load.
11. TROUBLES, CAUSES AND REMEDIES
The following is a list of the possible troubles, their causes and remedies.
If the problem is not included in the list, stop the use of the lift and immediately contact the
manufacturer or the authorised dealer to receive appropriate instructions.
It is recommended to employ trained personnel to avoid manipulation of the lift or its controls.
TROUBLES CAUSES REMEDIES
EASY LIFT 3000 stops
while lifting There are obstacles in the
lifting column Bring the load down, turn off the
power supply and remove the
obstacle
The controls are on but
the crick-lift does not
function
Excessive load
The air supply is not enough.
Check the load weight and follow the
manufacturer instructions.
Check that the air supply is between
8 and 10 bars
The crick-lift comes down
without using the pump
controls Dirt in the pump release valve Contact the manufacturer before
making any reparation
Oil leaking from the
pump Wearing of the grommets Contact the manufacturer before
making any reparation
Oil leaking from the
flexible hose Wearing or cutting of the hose Replace the flexible hose
Oil leaking from
couplings Wearing or defect of the
coupling Replace the detective coupling
18