MSC EAX-965Q User Manual Download Page 64

Page: 64 / 81

EAX-965Q

2.2.2.16 APIC Mode

This setting allows you to enable the APIC mode. The choices are “Disabled” or “Enabled.”

2.2.2.17 MPS Version Control for OS

This option is only valid for multiprocessor motherboards as it specifies the version of the

Multiprocessor Specification (MPS) that the motherboard will use. The MPS is a

specification by which PC manufacturers design and build Intel architecture systems with

two or more processors.

MPS 1.1 was the original specification. MPS version 1.4 adds extended configuration

tables for improved support of multiple PCI bus configurations and greater expandability in

the future. In addition, MPS 1.4 introduces support for a secondary PCI bus without

requiring a PCI bridge.

2.2.2.18 OS Select for DRAM > 64MB

Select the operating system that is running with greater than 64MB of RAM on the system.

The choice: Non-OS2, OS2.

2.2.2.19 Small Logo (EPA) Show

This item allows you enabled/disabled the small EPA logo show on screen at the POST

step.

Item

Description

Enabled

EPA Logo shows is enabled

Disabled

EPA Logo show is disabled

Summary of Contents for EAX-965Q


















































































Search results

Summary of Contents for EAX-965Q

Reviews:

Related manuals for EAX-965Q

Brands by name

Popular brands

MSC EAX-965Q, User Manual

Search results

Summary of Contents for EAX-965Q

Reviews:

Related manuals for EAX-965Q

Brands by name

Popular brands