MSC EAX-965Q User Manual Download Page 61

Page: 61 / 81

User’s Manual

EAX-965Q

2.2.2.2 Hard Disk Boot Priority

Set hard disk boot device priority

2.2.2.3 Virus Warning

Enables or disables the virus warning.

Item

Description

Enabled

Activates automatically when the system boots up causing a warning

message to appear when anything attempts to access the boot sector

or hard disk partition table.

Disabled

No warning message will appear when anything attempts to access the

boot sector or hard disk partition table.

2.2.2.4 CPU L1 & L2 & L3 Cache

Enabling this feature speeds up memory access.

Item

Description

Enabled

Enable cache

Disabled

Disable cache

2.2.2.5 Quick Power On Self Test

This allows the system to skip certain tests to speed up the boot-up procedure.

Item

Description

Enabled

Enable quick POST

Disabled

Normal POST

Summary of Contents for EAX-965Q


















































































Search results

Summary of Contents for EAX-965Q

Reviews:

Related manuals for EAX-965Q

Brands by name

Popular brands

MSC EAX-965Q, User Manual

Search results

Summary of Contents for EAX-965Q

Reviews:

Related manuals for EAX-965Q

Brands by name

Popular brands