MSC COM Express C6-MB-EVA, User Manual

Page: 37 / 63

MSC C6-MB-EVA - PRELIMINARY - User Manual
37 / 63
Pin Signal name Function
1 LVDS_A0- LVDS Negative data signal (-)
2 LVDS Positive data signal (+)
3 LVDS_A1- LVDS Negative data signal (-)
4 LVDS Positive data signal (+)
5 LVDS_A2- LVDS Negative data signal (-)
6 LVDS Positive data signal (+)
7 VSS Ground
8 LVDS_A_CK- LVDS Negative clock signal (-)
9 LV LVDS Positive clock signal (+)
10 LVDS_A3- LVDS Negative data signal (-)
11 LVDS Positive data signal (+)
12 LVDS_B0- LVDS Negative data signal (-)
13 LVDS Positive data signal (+)
14 VSS Ground
15 LVDS_B1- LVDS Negative data signal (-)
16 LVDS Positive data signal (+)
17 VSS Ground
18 LVDS_B2- LVDS Negative data signal (-)
19 LVDS Positive data signal (+)
20 LVDS_B_CK- LVDS Negative clock signal (-)
21 LV LVDS Positive clock signal (+)
22 LVDS_B3- LVDS Negative data signal (-)
23 LVDS Positive data signal (+)
24 GND Ground
25 LVDS I2C DAT I²C Data
26 VDD EN Display power enable signal
27 LVDS I2C CK I²C Clock
28 VCC LCDSW
Switched Power Supply
(Voltage depend on JP1701)
29 VCC LCDSW
Switched Power Supply
(Voltage depend on JP1701)
30 VCC LCDSW
Switched Power Supply
(Voltage depend on JP1701)
Table 15 Pin-out JILI30 LVDS-Interface
4.14.1 LVDS EEPROM Socket
A serial EEPROM is connected to the signals LVDS_I2C_CK and LVDS_I2C_DAT to store
configuration data of the LCD.
This EEPROM can be assembled optionally or it can be disabled with a closed DIP-Switch S2906
#4 to avoid conflicts with configuration EEPROM connected via the JILI connector.
Specification:

References: U1601

Connector: DIP8 socket

Pin-out: Refer to Table 16

Location: Refer to chapter 4.14 LVDS-Interface