MSC C6-MB-EVA
- PRELIMINARY -
User Manual
36 / 63
4.14
LVDS-Interface
Any LCD display can be connected via a JILI30 connector.
Two 24 bit LVDS channels are present on this 30-pin connector.
The supply voltage of the display can be adjusted with jumper JP1701. The according position is
printed on the PCB. +12V supply voltage is only available with setting R1707 (0R0).
If the display needs a low active start signal VDD_EN, DIP-Switch S2906 #2 has to be set open.
If the display needs a high active start signal VDD_EN, DIP-Switch S2906 #2 has to be set on.
Specification:
References:
X1601
Connector:JAE FI-X30SSL-HF
Pin-out:
Refer to Table 15 "JILI30" according to JILI specification [4]
