Version 1.0
8
Antenna heating system SOA-1022
1.5
Measurement instruments, tools and appliances
Control operation of the SC using integrated controls and LED light indicators.
For more information on the controls and LEDs see section 2.
Table 8 describes amount of consumables required for the TS.
Table 8 – Consumables required for the TS
Name and identifier
of consumables
Amount of
consumables
Note
Cleaning cloth
0.10 kg
To clean surfaces of the SC – use clean cloth.
To remove severe contamination – use cloth soaked in
alcohol
Rectified hydrolytic
technical ethyl
alcohol
0.05 l
To soak cloth while cleaning the Product
Varnish
0.05 kg
To cover surfaces of the Product in case of paint coating
damage
Abrasive cloth
0.06 х 0.06 m
To polish surfaces of the Product in case of paint coating
damage
1.6
Marking and sealing
The SC have nameplates providing the following information:
‒
name;
‒
power supply voltage (switching voltage – for КР);
‒
protection degree (if present);
‒
power consumption (if present);
‒
weight;
‒
serial number;
‒
date of manufacturing;
‒
the manufacturer’s address and trademark.
Marking of transport packaging is carried out according to the applicable
standards,
and
includes
the
following
handling
marks:
“Fragile (goods). Handle with care”, “Keep dry”, “This side up”.
Sealing of the System and SC is not provided.
1.7
Packaging
AHU and CSAHS are packed in close-boarded boxes, repeater and КР – in
corrugated board boxes. All packaging of the SC include inner packaging (air bubble
film).
Transport packaging is also used as a returnable packaging for transportation
to the repair location and back.
Packaging sealing is not provided.
