MSA SavOxCap 60, Operating Manual

Page: 13 / 178

GB
MSA MAINTENANCE AND SERVICE
SavOxCap 60
13
Attention!
The following details for inspection and maintenance apply for devices
that are carried occasionally or regularly.
Intervals
1)
Inspection measures
Before and after
carrying External status checks
5)
Annual
2)
Tightness test (  section 4.2)
4)
After 3 years Tightness test and complete inspection of all heavily
loaded units
3)
.
After 5 years
2)
Complete inspection of all devices
3)
After 8 years
2)
Tightness test and complete inspection of all heavily
loaded units
3)
.
After 10 years Replace unit, use no longer permitted.
1) The criterion for the intervals is the date of manufacture (month/year) on the container.
2) It is recommended that you make a service contract with MSA Customer Service.
3) Complete inspection = Internal inspection and check. The result will decide whether the unit can be
used further.
4) Tightness test with tightness tester D1118845 or by MSA Customer Service.
5) Checks that the seal is intact and that there are no external damages on the device.
Documentation
MSA recommends keeping a file for each SavOxCap 60 where the serial
numbers, the dates of manufacture and the dates and results of the inspections
are recorded.