MSA OptimAir MM 2K, User Instructions

Page: 27 / 32

TAL 0110 (L) Rev. 8 - 10020949
ACCESSORIES
INSTALLING THE NOSECUP FOR
ULTRAVUE/ULTRA ELITE FACEPIECE
1. Place the nosecup in the facepiece
and position it so its rubber ring
faces toward the plastic retainer
ring.
2. Starting at the
top, stretch and
push the rubber
ring of the nose-
cup under the
plastic retainer
ring of the speak-
ing diaphragm assembly.
3. Continue stretching the nosecup
ring and work it into place.
4. For Ultra Elite masks only, stretch
the oval opening in the nosecup
around the lip on its component
housing.
INSTALLING NOSECUP FOR ADVAN-
TAGE 3000 MASKS ONLY
1. Place nosecup into facepiece with
notch of nosecup facing the bottom
of facepiece.
2. Place bottom of nosecup under
facepiece seal.
3. Stretch nosecup over Inhalation
Valve Housing ensuring notch of
nosecup is over tab of inhalation
valve housing.
4. Stretch nosecup around lip on
inhalation valve housing ensuring
nosecup is in place.
SPECTACLE KIT
Spectacle kits are available for the
Ultravue (P/N 454819), Ultra Elite (P/N
804638), and Advantage 3000 (P/N
10029298) Facepieces. The kit includes
the support assembly, a rubber block,
and the spectacle frame. Prescription
lenses can be obtained locally or
through MSA.
ADJUSTING THE SPECTACLES
1. To move the spectacles closer to
your face, pull the frame prongs out
of the rubber block.
2. To move the spectacles farther from
your face, push the frame prongs
into the rubber block.
3. To move the
spectacles up or
down, slide the
rubber block up
or down on the
support arms.
SPARK COVER
1. Remove spark cover from packag-
ing.
2. Install the filter cartridge.
3. Once the filter
cartridge is
attached, align
the feet of the
spark cover with
the inlet hole of
the cartridge.
27
check for spark
arresting material
Spark Arresting
Material