(2)
Optional: Insert SIM card.
Place the SIM card into the SIM card holder.
NOTE:
Do not touch the circuit board assembly. Observe electrostatic
procedures.
(3)
Use four M6 screws with a torque of 1.8 Nm (1.3 ft-lbf) to fasten the wall
brackets (Part Number 10203364) at the back of the housing.
(4)
Install device at the desired space.
When installing the device on a solid plain surface, use four appropriate
screws and apply a torque of 5 Nm (3 ft-lbf).
(5)
Close housing lid by tightening the lid screws with a torque of 1.5 Nm (1 ft-lbf).
(6)
Close right joints.
MSA HUB
9
GB
3 Assembly and Installation