(6)
Tighten upper nut with a torque of 7.5 Nm (5.5 ft-lbf).
The cable gland is fixed in the housing
(7)
Plug Ethernet plug onto mainboard.
(8)
Tighten lower nut with a torque of 0.4 Nm (0.3 ft-lbf).
The cable is fixed within the cable gland.
(9)
Close housing lid by tightening the lid screws with a torque of 1.5 Nm (1 ft-
lbf).
(10) Close right joins.
The Ethernet connector is installed.
MSA HUB
18
GB
3 Assembly and Installation