(2)
Remove protective foil from adhesive area.
(3)
Pass the antenna cables through the hole.
(4)
Put the antenna on the surface.
The adhesive area completely sticks to the surface.
(5)
Re-attach flat washer, spring lock washer and lock nut.
(6)
Screw lock nut with a torque of 50 Nm (36 ft-lbf).
(7)
Attach antenna cables to the relevant MSA HUB antenna connections.
NOTE:
GPS connection is for future use.
Label
Connector
2G/3G/4G MIMO1
LTE 1
2G/3G/4G MIMO2
LTE 2
GPS-Glonass
GPS
2.4/5.8 GHz
Wi-Fi
The Multi antenna is installed.
3.2.2 LRR Antenna
(1)
Remove any burrs, particularly on the roof under the side of the hole.
(2)
Remove any paint in a narrow ring around the hole.
MSA HUB
15
GB
3 Assembly and Installation