NOTE: Enter the four-digit year in the same manner as
the password was input to access the factory mode.
•
The choice is confirmed by pressing the <ACK/VALID>
button or rejected by pressing the <ESC/TEST> button.
To Access the Code <CodE> Mode:
1.
Select <CodE> and press the <ACK/VALID> button.
•
The password code is listed.
2.
Press the <ACK/VALID> button to change the code.
3.
Use the <SCROLL UP> and <SCROLL DOWN> buttons to
set the new Factory Mode Password.
NOTE: Enter the new Factory Mode Password in the same
manner as the initial password entry.
•
The choice is confirmed by pressing the <ACK/VALID>
button or rejected by pressing the <ESC/TEST> button.
To Access the Password Reset <1 c2> Mode:
1.
Select <1 c2> and press the <ACK/VALID> button.
•
YES appears on the display.
2.
Press the <ACK/VALID> button to reset the Password to 0000.
•
The choice is confirmed by pressing the <ACK/VALID>
button or rejected by pressing the <ESC/TEST> button.
To Access the Connection Series <nisc>
Mode:
1.
Select <nisc> and press the <ACK/VALID> button.
•
This allows the user to set a Printer output (RS232) or to
set the channel for JBUS Slave output (RS485).
To Access the RS Output <rs> Mode:
1.
Select <rs> and press the the <SCROLL UP> and <SCROLL
DOWN> buttons to choose between Printer Mode (INp) or
jbuS Slave Mode (JbuS)
•
The choice is confirmed by pressing the <ACK/VALID>
button or rejected by pressing the <ESC/TEST> button.
Chapter 3, Start-up and Operation
3-9
