3. Place the arms against the lens and release them.
NOTE:
The ends of the arms also must be against the lens.
10.2.2 Adjusting the Spectacles
1. To move the spectacles closer to your face, pull the frame prongs out of the rubber block.
2. To move the spectacles farther from your face, push the frame prongs into the rubber
block.
3. To move the spectacles up or down, slide the rubber block up or down on the support
arms.
10.3
Filter Cartridge Assembly
Filter cartridges are used to remove slight odors from gases or vapors, or to remove dusts, mists, and fumes that may be in the
air supply.
When odors of vapors or gases become noticeable, or when breathing resistance becomes uncomfortable, the cartridge must
be replaced.
The P/N 476089 Cartridge Holder is approved for use with the supplied-air configuration of the Abrasi-Blast Respirator only,
when it is equipped with the following filters:
GMA Cartridges approved for respiratory protection against not more than 1000 parts per million of organic vapors. Available in
packages of 10 under P/N 464031.
P100 Cartridge approved for respirator protection against particulates under the 42CFR84 P100 classification (99.97%
efficient against all particulate aerosols including oil-based aerosols). Available in packages of ten under P/N 815175.
US
Abrasi-Blast Respirator
28
10 Accessories