www.moldex.com
Datasheet
FFP masks
Protection against Dust, Mist & Fumes
EU - 0
1 - 20
10
/ 0
1
CERTIFIC ATION
The Moldex Series 3000 FFP-masks meet the requirements of EN149:2001 +
A1:2009 and are CE-marked in accordance with the requirements of European Di-
rective 89/686/EEC. The BGIA Germany is responsible for both type examination
(Article 10) and monitoring of production (Article 11).
The products are manufactured in an ISO 9001:2000 certifi ed plant.
MATERIALS
Filter Layer, Inner Shell, DuraMesh
®
:
Polypropylene,
Ethylene-vinyl acetate (EVA)
Cusion Seal:
TPE
Head Strap:
Polyester, Natural Rubber
Ventex
®
-valve:
Natural Rubber
WEIGHT
3505:
42 g
AREAS OF USE
(WEL = Workplace Exposure Limit)
Series 3000 NR (3505)
CHARACTERIS TICS
ActivForm
®
Automatically fi ts to the face.
No manual adjustments by the user are necessary.
DuraMesh
®
Masks have a strong and durable structure.
Ventex
®
-valve
Starts to open even at low exhalation pressure and
significantly reduces moisture and heat inside the mask.
Low breathing resistance
Pleated fi lter technology reduces inhalation resistance by up
to 50% whilst maintaining fi ltration performance.
Full face seal
3D face seal – like a rubber half mask – improves fit
and provides optimum wearing comfort.
Adjustable Clip
Easy on & off; Adjustable strap for optimal fit and
wearer comfort.
100% PVC-FREE
All Moldex products and packaging are
completely free from PVC.
NR
(non reusable) = Single use.
Comfortable and durable throughout the whole shift
FFP3 NR
3505
with Ventex
®
-valve
Level
WEL
Hazard type
Examples
FFP3
20 x
FINE TOXIC DUSTS, FUMES, WATER AND OIL BASED
MISTS/AEROSOLS
As FFP2 but at higher concentrations, plus: Ceramic Fibres,
Chromates, Chromium, Cobalt, Nickel, Micro Organisms,
radioactive and biochemical active Aerosols
