For
a�er
sal
e
s s
e
rvic
e
, pl
e
as
e
contact Cypr
e
ss M
e
dic Sdn Bhd (
www.cypr
e
ss
me
dic.com.my
)
Rossmax Nebulizer NB80
Quick Guide
How to use nebulizer NB80
1. Assembling your nebulizer kit
Follow the cleaning instruc
�
ons in this guidebook under “Cleaning technique” prior to using your
nebulizer for the
fi
rst
�
me or a
�
er it has been stored for an extended period of
�
me.
REMEMBER: Always unplug the compressor and make sure the power-switch is turned to the “OFF”
posi
�
on before cleaning, assembling and before or a
�
er each use.
1. Place the compressor on a
fla
t, stable surface within reach.
2. Gently twist and pull straight up on the lid of the nebulizer to separate into two parts (medica
�
on cup
and cover).
3. Make sure that the nozzle is properly installed inside the medica
�
on cup. The stem inside the
medica
�
on cup inserts into the tube of the nozzle.
4. Add the prescribed amount of medica
�
on to the medica
�
on cup.
5. Reassemble the nebulizer by carefully twis
�
ng the medica
�
on cup and cover together.
Make sure that the two parts
fi
t securely.
2. Operating your nebulizer
The nebulizer is operable at up to a 45° angle. If the angle is greater than 45°, no aerosol will be
generated.
1. A
�a
ch one end of the air tube connector to the air output.
2. Carefully a
�
ach the opposite end of the air tubing connector to the stem at the base of the nebulizer
kit.
3. A
�a
ch the angled mouthpiece or mask to the top of the nebulizer.
4. The capacity of the medica
�
on cup is 2~5 ml.
NOTE
: A 30-minute interval is recommended a
�
er each use.
3. Steps of keeping your nebulizer
A
�
er every use:
1. Unplug the unit from the power source.
2. Allow the unit to completely cool.
3. Carefully detach the air tubing from the nebulizer and pour out any remaining medica
�
on.
4. Follow the cleaning procedures provided in this guidebook.
