MS ENERGY NEUTRON n1, Instruction Manual

Page: 174 / 204

ENG
9
1. In the process of use, pay attention to checking the fastening status
of the motor and other structure, and if a loose phenomenon is
found, it should be tightened timely.
2. When starting the power supply or meeting a steep slope, assist as
far as possible to reduce the starting current and extend the battery
life and continuation line mileage.
3. In rainy days, please pay special attention to: when the water depth
is more than 3cm, it is likely for the motor to soak water, thus
resulting in failure.
4. Users must use the charger specified by manufacturer for charging
the storage battery. When charging, put the battery and charger
smoothly.
5. It is prohibited that other items are covered on the battery box and
charger to impede heat, where good ventilation environment
should be maintained.
6. Please keep appropriate air pressure inside the tires (if tires are
with air pressure tube), so as to avoid increasing the resistance
when driving, and easily wearing the tires and deforming the Rim.
7. Drivers should abide by traffic rules, and the riding speed should be
controlled below 25km/h.
8. When high‐speed running or downhill, control a speed to avoid
hard braking to avoid the center of gravity from moving ahead, thus
resulting in danger.
9. After driving a long distance, allow the battery to cool
for 30 minutes and then connect it to the charger. Do
the same thing after driving in cold weather
conditions
10. Do not use E‐Scooter in snow or stormy weather conditions!
IMPORTANT:
The protective cover of the e‐scooter charger socket must
always be properly positioned in it's place to prevent
water or dust entering. Otherwise, moisture or
impurities may cause short circuits or unit malfunction.