MS ENERGY NEUTRON n1, Instruction Manual

Page: 181 / 204

ENG
16
Riding

Press the power button to turn on the power. The speed is set by default to gear
level 1.
 For safety purposes, Electric scooter has a safe start design which means the
motor can start only when the speed of the vehicle is above 0. It prevents motor
start when the acceleration handle is pressed by mistake. To start the riding
operations, put one foot on the standing board and the other foot on the ground
and kick scoot it like a classic kick scooter. When the scooter is in motion and its
speed is above 0, smoothly use the acceleration handle to start the motor. Once
the motor starts, put the other foot on the standing board and continue riding.

When riding, adjust the gear level from 1 to 3, use lights and horn according to the
road conditions and according to the situation.
 Be aware of the cruise control function. Cruise control function is activated when
the acceleration handle is pressed with the same pressure for 5 seconds.
 Be aware of the possibility of unpredictable sudden obstacles on your way and
control the speed level.
Braking
 Use the rear brakes handle for braking under normal circumstances. Please, adjust
your speed according to driving conditions and take care that you can stop safely
in any situation.
 The greater pressure you put, the greater braking force will be applied. Be aware
that hard braking may result in an accident due to slipping of the wheels, lost of
balance and fall of the vehicle. Hard braking might also cause damage to the tire.
7 USE AND MAINTENANCE
Tires and other parts

Electric scooter uses rubber elastic tires. When the tires are worn out or have a
puncture, they need to be replaced timely.
 Contact the official distributor or service to replace the original tires.
 Inspect your scooter and its tires every month, check if the screws are tightened
enough. If they are loose, tighten them.
Battery
 Electric scooter is equipped with a lithium polymer battery. The average lifespan
of the battery is 500 cycles. Under normal use and maintenance, the battery
lifespan can generally reach more than 600 cycles with minimum decreasse of
Battery .
 Before using the scooter for the first time, please charge the battery to the full
charge.
 Avoid totally depleting your scooter’s battery before charging. Always make sure
it is minimum 10 % charged. For satisfactory vehicle performance, the battery has
to be charged minimum 50 %