mru VARIOluxx User Manual Download Page 22

Page: 22 / 129

User Manual

VARIO

luxx

22 / 129

MRU GmbH, D-74172 Neckarsulm

4.4.

Switching on the analyser

►

Touch the

⏻

button (1) for 3 sec. minimum



LED lights blue

►

Release the

⏻

button (1).



Analyser runs up.

4.5.

Switching off the analyser

There are two possibilities to switch off the analyser.

►

Touch the Context menu (19) on the display.



A selection list appears.

►

Touch „Turn unit off“.



A message appears.

►

Touch „YES“.



The analyser shuts down.

Alternatively, you can switch off the analyser as follows:

►

Touch the

⏻

button (1).



A dialog window appears.

►

Touch „YES“.



The analyser shuts down.

4.6.

Turn Display

►

Touch the Context menu (19) on the display.



A selection list appears.

►

Touch Display settings.



A window appears.

►

Touch



The display turns.

Summary of Contents for VARIOluxx


































































































































Search results

Summary of Contents for VARIOluxx

Reviews:

Related manuals for VARIOluxx

Brands by name

Popular brands

mru VARIOluxx, User Manual

Search results

Summary of Contents for VARIOluxx

Reviews:

Related manuals for VARIOluxx

Brands by name

Popular brands