mru AirFair OPTIMA 7 NDIR, User Manual

Page: 30 / 58

MRU GmbH USER MANUAL OPTIMA 7 - NDIR
30
12 HOW TO TAKE A MEASUREMENT
Every OPTIMA 7 - NDIR is capable of making a complete flue gas measurement. How to perform
this is described below.
The description of other optional available measurement programs can be read in the appendix or
in additional flyers.
12.1 Selection of the measurement program
In the measurement menu select “Flue gas measurements” then select one of the available pro-
grams.
If you press the F1 key “Start” in the measurement menu, you will be directed directly into the
measurement screen, using the parameters that have been selected last time the analyser was
used.
, ,
change between the lines
12.2 Measured Value Display
Measurement values can be organized on three pages, each page displaying 6 measurement val-
ues.
The order of the display is operator settable.
There are direct measured values available such as CO and Temperature as well as P.E.F facor
and
Values that cannot be displayed are indicated with dashes. Possible reasons for value not being
displayed are:
•
Electro chemical sensor was detected as defective during zeroing.