mru AirFair OPTIMA 7 NDIR, User Manual

Page: 33 / 58

MRU GmbH USER MANUAL OPTIMA 7 - NDIR
33
12.7 Last measurement results
The analyser allows the viewing of the last measurement after a measurement is completed.
In the main menu “Measurement” select the point “last meas. values”.
The last values can be viewed, printed and/or saved.
OK F1
Above the F1 key “Start“instead of “Stop” is displayed. Pressing this key will continue the meas-
urement.
12.8 Pressure measurement
Pressure (4 values) is measured and saved to the selected measurement name. The actual meas-
ured value is displayed in the middle of the display. The 4 measurement names can be changed as
desired.
The hose on the draft + connector must be connected for draft measurements.
The second hose on the Delta P- connector must be connected for differential measurement.
OK
,
Select the measurement name 1-4
F1 Save the measured value to one of the measure-
ment name
F2 Zeroing the pressure sensor
F3 Change the name of the measurement category
ESC Return to the measurement menu