Pan Bars Quick Start Guide
21
Changing the axis settings
You can also change the axis settings an assign 4 mimic axes in Pan Bars
to an axis in the head.
For example, Axis 3 in Pan Bars is of type FOCUS by default and mimics
the Focus axis on the head. If you want to use two zoom controllers, one
for zooming the robot and the other for roll, you can change Axis 3 to
zoom type that mimics the robot roll axis. To do so:
1.
Double-click the rig
Type
box.
2.
Select the axis tab that you want to change. Pan Bars have four
mimic axes that you can change: Pan, Tilt, Focus and Zoom.
Note
It is recommended that you contact MRMC for assistance in
changing default axis settings.
Note
At any point, if you want to revert to the original settings, click the
RESTORE DEFAULTS
button.
Axes in Pan Bars
Type of Pan Bars
axis
Robot axis
Restore factory
defaults
Summary of Contents for MRMC-1465-06
