RV13 Model Mover Quick Start Guide
23
Shutting down the RV13 Model Mover system
1.
Move RV13 Model Mover to its Home position, for both the arm.
or...
If you are going to transport RV13 Model Mover to a new location,
put the RV13 Model Mover arm into its Transport position. You can
do this by using Flair (although you might have to reset the soft
limits to reach the Transport position).
2.
In the Flair software, click on the
Disengage Robot
button.
3.
Press down all E-stop buttons.
4.
Close the Flair software.
5.
Shut down Windows on the Flair PC.
RV13 Model Mover Transport position:
•
Arm rotated forward and tucked under.
•
Arm about 45 degrees to base slope, above the wheel unit,
with about 12cm clearance between it and the base.
Summary of Contents for MOVER RV13
