RV13 Model Mover Quick Start Guide
7
Mounting the Weight Plates
1
Line up the
screw
cavities
2
3
5
Weight plate
Weight box
Bridge
1.
Use the jack screws on the castor wheels to lift the base high enough
to insert each of the weight plates on either side of the RV13 Model
Mover Base lining up the screw cavities.
2.
Lower the base close to the wing but not quite resting on it, close
enough for the two retaining bolts to reach the wings through the
base.
3.
Lower the base completely so it is resting on both wings. Secure the
weight plates using the 2xM10 screws on either plate. The screws
Summary of Contents for MOVER RV13
