Milo Quick Start Guide
37
Power and Environment
Power requirements:
Standard Milo: 3.5KVA, 20A each on two 115v plugs, or 10A each on two
240v plugs
Milo with Titan arm: 380-415 volts 3-phase (earthed/grounded) and
Neutral, 5kVA.
The Gorilla Power Supply must be internally set to the voltage of single
phase supply that will be used in that studio or country. There are taps
inside the PSU that allow this changeover. This does not apply to the Milo
if used only with the Titan Arm, as then it must be 240v phase to neutral,
but the PSU must be set internally to this.
Temperature range: 0-45 °C (32-113 °F)
Humidity tolerance: 0% to 85% relative humidity, non-condensing
