Milo Quick Start Guide
16
Mounting the Milo main arm
1.
Insert the lifting bars in the arm cavities and tie the lifting straps
around these. If the nose is not already mounted on the arm, it is
back heavy so for safety purposes tie another strap in the front of the
arm and one person hold it while another person lifts the arm using
a gantry hoist.
2.
Slide the arm bearings towards the centre and lower the arm such
that the slots bearings on both sides align with the top of Lift
Ballscrew clamps.
3.
Line 2 x rear arm bearings on the shoulder of the arm and seat them
in the slots on the plate above the centre shaft. Ensure that the shock
absorbers are clear of any obstruction.
Strap tied in the
front
Lifting bars
Arm bearings
Arm bearing
Lift ballscrew
clamp
