16
cylinder guard and remove the guard.
2.
Disconnect the fittings (B) and hydraulic hoses from
the cylinder.
3. Remove the two tie straps (C) securing the hoses to
the cylinder.
4. Remove the bolt (D), nut and cylinder pin weldment
to remove the cylinder.
5. Install the new cylinder with the bolt, nut and cylin-
der pin weldment.
6.
Install the fittings and hoses to the cylinder.
7. Install tie straps to secure the hoses to the cylinder.
Servicing
Troubleshooting
Cause
Action
Tubes won’t expand or collapse.
1. Check to be sure the attachment hydraulic couplers are fully connected.
2. Check for foreign material in the tubes.
3.
See the loader operator manual to check loader hydraulic pressure and flow.
4. Contact the attachment manufacturer.
Summary of Contents for 14592
Page 17: ...17 Replacement Parts...
